服務熱線
021-60873559
您現在的位置:>首頁 > 產品展示 > 哈美頓OEM 電極/傳感器 > 氧電極 >VisiPro DO 225
品牌 | HAMILTON/哈美頓 | 供貨周期 | 現貨 |
---|
VisiPro DO 225
產品介紹
貨號:243421
*根有防爆認證的光學溶解氧氧電極
VisiPro DO 225是*的能夠用于防爆區域的光學溶解氧電極。
詳細介紹
光學測量原理改善了測量的性能,簡化了維護的程序。改善性能是相對于傳統的電化學(電流法)電極,不受流速的影響,快速啟動無需極化時間,維護十分簡單。
內置變送器,電極可以直接和過程控制系統通過4~20毫安信號或者數字信號HART相連接。所有相關的數據,包括校準信息,診斷信息等都儲存在電極頭中簡化了校準和維護的程序,附加的無線通訊功能可以使電極直接和你的電腦相連接,簡化了實驗室校準、設置和維護程序。
為什么選擇VisiPro DO Ex?
簡化了校準和維護程序:
Specifications
Measurement Principle | Oxygen dependent luminescence quenching |
Measuring Range | 4 ppb to 25 ppm (DO) or 0.1 to 600 mbar (pO2) |
Oxygen Consumption | None |
Required Flow | None |
Response Time t98% | < 30 s at 25 °C, from air to nitrogen |
Temperature Sensor | NTC 22 kOhm |
Drift at Room Temp. under Constant Conditions | < 1 % per week |
Configurable Values | DO: mbar; %-sat; %-vol; µg/l; mg/l; ppb/ppm (gas); ppb/ppm (dissolved oxygen); Temperature: °C |
Autoclavable | No |
CIP | Yes |
Steam Sterilizable | Yes, max. temperature 140°C |
Process Temperature | -20 to 140 °C; the Sensor provides no DO reading above 85 °C |
Pressure Range | 0 to 12 bar |
O-ring Material | EPDM (FDA approved) |
Surface Quality of Steel | Ra < 0.4 µm (N5) |
Protection Rating | IP 68 |
Certificate | Yes, with parameter settings and materials used |
Serial Number | Yes |
a-length | 120 mm |
Diameter | 12 mm |
Process Connection | PG13,5 |
Electrical Connector | M12 |
Analog Interface 1 | 4-20 mA for DO, programmable |
4 - 20 mA accuracy | < 0.3% current value + 0.05 mA |
4 - 20 mA current range | 3.5 to 22 mA |
Operating Voltage | 18 to 30 VDC |
Digital HART Interface | HART Version 7.0 |
Analog Interface | Two wire sink needs to be powered by external power supply |
Wetted Parts | Stainless steel 1.4435, Silicone (FDA approved), EPDM |
Electrolyte | None |
Membrane / Cap | Only compatible with H cap; Cap needs to be ordered separay |
Accuracy at 25 °C | 1 ± 0.05%-vol: 21± 0.2%-vol; 50 ± 0.5%-vol |
Digital HART Interface | HART Version 7.0 |